New Pedestrian and Bike Regulations in City Code

As of July 1st, the City of Laurel has adopted a Unified Land Development Code. This new code consolidates and replaces the existing zoning ordinance, subdivision regulations, forest conservation codes, and all other development-related regulations.  Several particular changes have been made in the Code with regard to the way that new developments accommodate and mitigate traffic.  Specifically, developments will now have to accommodate pedestrian and bicycle travel, in addition to the vehicle traffic that developments have traditionally been required to mitigate.  These changes will help provide alternative choices for City residents to get around town. The changes are as follows:

1. Sec. 20-2.2. (b)(3)  Requires traffic impact studies to look at the effects of bike and pedestrian traffic generated to and from new developments, instead of only vehicle traffic. This will insure that traffic mitigation, if needed, applies to pedestrian and bike traffic, instead of just car traffic.
2. Sec. 20-16.12. (b), (g)  Reduces and/or consolidates the number of parking lot driveways during redevelopment projects. The purpose of this change was to reduce the number of conflict points the lead to crashes - for cars and for bikes and pedestrians.
3. Sec. 20-31.5. (b)  All new blocks are now limited in length to 500 feet. The previous limit was 1400 feet. This change encourages shorter blocks to reduce the likelihood of mid-block crossing in commercial areas that get a lot of pedestrian traffic.
4. Sec. 20-31.1. (c)  For new developments, minor streets are to be designed such that speeding is discouraged. Potential methods, offered by the Code, include traffic calming, sharp corner radii, narrow streets, and bump-outs at intersections. By providing for traffic calming in the design process, it prevents the City from going back and having to retro-fit a speed reduction fix into a neighborhood.
5. Sec. 20-31.1. (o)  Dead-end streets (e.g. cul-de-sacs) are now prohibited.
6. Sec. 20-28.7 (e)  Bike Parking requirements: All new multi-family, office and commercial developments must provide bicycle parking. For residential properties, two spaces are required for every five dwelling units (exemptions are made for Single family, duplex, triplex, and townhouse developments are exempt from residential bike parking requirements). For retail and restaurants, two spaces are required for every 2,500 square feet. For all other commercial or office properties, two spaces for every 5,000 square feet. A single rack constitutes two spaces. Bike racks shall be either an “Inverted U-Style (Bike Arch)” type or a “2-Bike Post and Ring” type and have a powder coat finish. Wave or Grid type bike racks are not permitted. Bicycles must be able to be locked in two places. Outdoor bike racks must be located within visual distance of the entrance of the building for which the parking has been designated. Bike parking for office buildings and for residential, if applicable, shall be located indoors. Rack areas located outdoors must be lighted with a minimum foot-candle of 1.0.
7. Sec. 20-44.6. On new developments, sidewalks are required on both sides for primary and secondary residential streets; the Code previously required sidewalk on only one side. Minimum sidewalk width is now 6' with the exception of residential-only areas. For new developments or redevelopments, roadside hiker-biker trails on property that abuts permittee’s property must be extended, in kind, through permitee’s property in the City’s public right of way. In addition, bike facilities shall be required in the City right-of-way, as referenced in the City of Laurel Bikeway Master Plan.  Bicycle facilities should extend to the nearest intersection on each side of the permittee’s property.   These changes provide for the continuation of investments the City has made in alternative travel modes.